Table of Contents
Advertisement
14
Appendix B
Troubleshooting
This section describes problems you may encounter when installing the
TurboChip processor upgrade.
following:
1.
Read this section carefully, and see if your problem is described. Try
the suggested actions.
2.
If necessary, call the place of purchase. However, before you call,
write down the following information:
•
Your computer make and model.
•
The exact wording of any error messages associated with
your problem.
•
The contents of your CONFIG.SYS and
AUTOEXEC.BAT files.
•
The version numbers of your software applications and
operating system.
Computer Does Not Start
If there is no display on the screen when you turn the power on:
1.
Check the fan on the TurboChip unit. It should be spinning. Also
check the 4-pin power cable which leads from the TurboChip unit.
Verify the power cable is plugged into the system power supply.
Ensure that all the external cables are correctly plugged in and power
is ON. There should be a light on your system unit and on your
monitor indicating that they have power.
2.
Turn off your computer and disconnect the power cable. Remove the
cover from the system unit and check the seating and orientation of
the processor upgrade. The best method for checking the seating of
the TurboChip is to remove the processor upgrade and carefully
reinstall it. But first, verify that the sidebar lever is down in the
locked position after reinserting the unit.
Kingston Technology Company
Appendix B
If you experience any problems, do the
TurboChip 200 User's Guide - Rev. A01
Troubleshooting
Advertisement
Table of Contents
