Table of Contents
Advertisement
6
Step 4. Orienting the TurboChip
When installing the TurboChip, the orientation of Pin 1 (See Figure 1 on page
3) must match Pin 1 on the processor socket (See Figures 2 and 3 on page 3).
The orientation of the processor socket will vary depending on the make and
model of your particular computer. Follow the steps below to determine the
correct orientation of TurboChip in your computer.
1.
Look at the TurboChip carefully to verify which corner is Pin 1.
Refer to Figure 1 on page 3 for help in locating Pin 1 on the
TurboChip.
2.
With the TurboChip positioned so that the beveled corner on the
upgrade matches the beveled corner on the processor socket, you are
ready to insert TurboChip into the empty CPU socket.
Warning: The processor pins are keyed to fit into the socket one way only. If
the processor upgrade is not installed correctly (Pin 1 to Pin 1), it may result in
damage to the computer, the processor upgrade, or both. Please orient Pin 1
on the TurboChip upgrade to match Pin 1 on your CPU socket. Refer to
Figure 5 below.
Figure 5: Orienting the TurboChip
Kingston Technology Company
Pin 1
TurboChip 200 User's Guide - Rev. A01
Hardware Installation
Advertisement
Table of Contents
