Polygroup Home Heritage TG80P2763D00 Assembly Instructions

TREE ASSEMBLY INSTRUCTIONS

Congratulations on purchasing your new tree from
Carefully follow the instructions below on how to quickly and easily set up your new tree.
Parts
Metal stand Section 4
2 pcs 1 pc

Tree Stand Assembly

*Electrical Rating For The Tree
(For Indoor And Outdoor Use)
0.35A 120V 60Hz
STEP 1
Insert bottom section 1/6 into tree stand.
STEP 2
Insert middle section 2/5 into bottom section 1/6.
STEP 3
Snap together top sections 3 and sections 4 to
form arch top.
STEP 4
Insert pre-shaped arch top (sections 3 and
sections 4) into middle section 2/5.
STEP 5
Connect the light strings as shown in Fig. 1.
NOTE:
1. For outdoor ground use. Push the stakes into
ground as shown (Fig 1).
2. If you want to use timer, please plug the
power plug into the timer (Fig 1).
MODEL #: TG80P2763D00
Polygroup®!
Section 3 Section 2/5
1 pc 2 pcs
Pull apart the legs of the stand so that they are
snapped into an x-shape, place the tree stand on a
level surface.
Click
To close the stand, press the metal button and fold
the legs together.
STEP 4
STEP 2
STEP 1
Section 1/6 Ground Stake
2 pcs 4 pcs
STEP 3
Section 3
Section 4
Assemble
Blue Labels
Together
Assemble
Assemble
Yellow Labels
Purple Labels
Together
Together
Section 5 Section 2
Assemble
Assemble
Orange Labels
Red Labels
Together Together
Section 6
Section 1
Insert
Green Label
Plug Into Wall
Outlet
Fig. 1
1
Pre-installed
V-Shape Spring
Pin (w/1 extra)
STEP 4
STEP 2
STEP 1
Assemble
Pink Labels
Together