Problem Solving Guide; The Programme Does Not Start - Miele WSG 663 Series Operating Instructions Manual

Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
Some of the messages in the display are more than one line long. Touch the  or
 sensor to read them in full.

The programme does not start

Problem
The control panel re-
mains dark.
The display prompts
you to enter a code.
The following appears
in the display:

 Service Door release
fault F35
Cause and remedy
There is no power to the machine.
 Check whether the mains plug is plugged in and
switched on.
 Check whether the fuse or circuit breaker has
tripped.
The washing machine has switched off automatically
to save energy.
 Switch the washing machine on again by turning
the programme selector.
Access via a code has been activated.
 Enter the code and confirm the entry. Deactivate
the code if you do not wish this message to ap-
pear in the display the next time the machine is
switched on.
The door is not closed properly. The door lock could
not engage.
 Close the door again.
 Start the programme again.
If the fault message appears again, contact the
Miele Customer Service Department.

Problem solving guide

63