Mixcder E9 User Manual page 5

5-2 Pairing the headphone with a phone
1.Make sure the headphone is off.
2.Do not place both devices more than 3 ft/1 m away from
each other.
3.Press and hold the power button on the headphone until
it powers on but don't let go just yet. Continue holding
down on the power button until you see the LED indicator
flashes blue and red alternately, which means your
headphone is in "pairing mode"waiting to be paired with
your device. You will hear a prompt.
4.Turn on wireless capability on your phone and search for
new devices.
5.Select the "Mixcder E9" to pair. Once successfully paired,
the LED turns to solid blue. You will hear a prompt.
5-3 Connecting to paired devices
Mixcder E9 will pair with the last paired device automati-
cally when turning on. Because of different systems, some
computers or laptops may need to be manually paired
every time.
6. Active Noise Canceling
Mixcder E9 contains a noise cancelling circuit, Noise mainly in
an airplane, buses or trains is effectively reduced.
1).The noise cancelling effect may not be pronounced in a
very quiet environment, or some noise may be heard.
2).The noise cancelling effect may vary depending on how
you wear the headphones.
3).The noise cancelling function works for noise in the low
frequency band primarily. Although noise is reduced, it is not
canceled out completely.
EN-4