Midea MISSION Smart Series Owner's Manual page 57

How To Use The Advanced Functions
SLEEP Functi Function( o
The SLEEP function is used to decrease
energy use while you sleep (and don
the same temperature settings to stay
comfortable). This function can only be
activated via remote control.
, ,
For the detail, see sleep operation in
,
,,
, ,
USER S MANUAL.
Note: The SLEEP function is not
available in FAN or DRY mode.
TURBO f TURBO function( u
The TURBO function makes the unit work
extra hard to reach your present temperature
in the shortest amount of time possible.
When you select TURBO feature in COOL
mode, the unit will blow cool air with
strongest wind setting to jump-start the
cooling process.
When you select TURBO feature in HEAT
mode, the unit will blow heat air with
strongest wind setting to jump-start the
heating process.
FRESH func FRESH function(
When the FRESH function is initiated, the
Ionizer/Plasma Dust Collector(depending
on models) is energized and will help to
remove pollen and impurities from the air.
FOLLOW ME function(
The FOLLOW ME function enables the
remote control to measure the temperature
at its current location and send this signal
to the air conditioner every 3 minutes interval
When using AUTO, COOL, or HEAT modes,
measuring ambient temperature from the
remote control (instead of from the indoor
unit itself) will enable the air conditioner to
optimize the temperature around
you and ensure maximum comfort.
,
t need
,,
(optional)
)
(optional)
.
SELF CLEAN function(
Airborne bacteria can grow in the moisture
that condenses around heat exchanger in
the unit. With regular use, most of this
moisture is evaporated from the unit.
When the SELF CLEAN feature is
activated, your unit will clean itself
automatically. After cleaning, the unit will
turn off automatically.
You can use SELF CLEAN as often as
you like.
Note: You can only activate this function
in COOL or DRY mode.
SET
Mode
57
)
(optional)
NOTE:
Press the SET button,
t
he selected function
indicator will flash on
the display area, press
Temp or Temp
button to confirm. The
indicator remains on
and this function is
activated.
To cancel the selected
function, just perform
the same procedures
as above.
Hold and
buttons together for 3
seconds will alternate
the temperature
display between the
O O
C & F scale.