Figure 50. Locking the M.2 solid-state drive clip
4. Complete the replacement. See "Completing the parts replacement" on page 65.
Completing the parts replacement
Prerequisite
After completing the installation or replacement for all parts, reinstall the computer cover and reconnect the
cables.
Replacement procedure
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside your computer.
2. Ensure that the cables are routed correctly before reinstalling the computer cover. Keep cables clear of
the hinges and sides of the computer chassis to avoid interference when reinstalling the computer
cover.
3. Reinstall the computer cover.
Figure 51. Reinstalling the computer cover
.
Chapter 7
CRU replacement
65