Related Manuals for peerless-AV DS-C555-3X2
Summary of Contents for peerless-AV DS-C555-3X2
- Page 1 DS-C555-3X2 46" - 55" 600 lb (117 - 140 cm) (272 kg) 2014-05-30 #:009-9084-8 (2018-06-15)
- Page 2 WARNING ENG - Do not begin to install product until you have read and understood the instructions and warnings contained in this user guide. Always use an assistant or mechanical lifting equipment to safely lift and position equipment. This product must be installed onto flat, hard, level surface to prevent tipping. Use with heavier displays may result in instability causing tip over resulting in death or serious injury.
-
Page 3: Parts List
Parts (Before beginning, make sure you have all parts shown below). Parts List Description Part # caster, 5" swivel 600-0026 caster support 145-T1799 cover 145-T1809 base leg 145-T1767 horizontal leg support 145-T1785 base support tube 145-T1812 base support 560-T1261 vertical leg support 146-T1131 left adaptor bracket 146-1609... - Page 4 O ( 2 ) M ( 1 ) N ( 1 ) computer cover computer shelf dual cross support P ( 4 ) Q ( 4 ) cord knurled bracket knob R ( 2 ) cross support S ( 4 ) T ( 132 ) U ( 48 ) plate...
-
Page 5: Side View
T (4) Do not fully tighten hardware U (2) T (2) SIDE VIEW 2014-05-30 #:009-9084-8 (2018-06-15) - Page 6 U (4) U (4) T (4) U (4) T (4) 2014-05-30 #:009-9084-8 (2018-06-15)
- Page 7 FLUSH TIGHTEN EDGES CONNECTING HARDWARE Casters must be flush to end of horizontal leg support. Z (2) SIDE VIEW Do not fully tighten hardware T (4) 2014-05-30 #:009-9084-8 (2018-06-15)
- Page 8 TIGHTEN CONNECTING HARDWARE LOCK WHEELS TIGHTEN CONNECTING HARDWARE 2014-05-30 #:009-9084-8 (2018-06-15)
- Page 9 1/8" 1/8" (3mm) (3mm) U (4) T (6) TIGHTEN CONNECTING HARDWARE 2014-05-30 #:009-9084-8 (2018-06-15)
- Page 10 U (2) DD (2) T (4) S (2) T (4) U (4) 2014-05-30 #:009-9084-8 (2018-06-15)
- Page 11 Must install bottom row first. TIGHTEN CONNECTING HARDWARE Tighten. Tighten. Cross supports must center on vertical leg supports. 2014-05-30 #:009-9084-8 (2018-06-15)
- Page 12 Must install top row last. TIGHTEN CONNECTING HARDWARE Tighten. Tighten. Cross supports must center on vertical leg supports. 2014-05-30 #:009-9084-8 (2018-06-15)
- Page 13 K (2) U (4) T (2) T (4) U (2) 2014-05-30 #:009-9084-8 (2018-06-15)
-
Page 14: Top View
P (4) Q (4) TIGHTEN CONNECTING HARDWARE OPTIONAL: Unlock wheels to move cart to desired location; Lock wheels before hanging screens. LOCK WHEELS TOP VIEW 2014-05-30 #:009-9084-8 (2018-06-15) - Page 15 13-1 Center adapter brackets vertically on back of screen. 13-2 AA BB 2014-05-30 #:009-9084-8 (2018-06-15)
- Page 16 14-1 "LOCKED" POSITION Must hang displays to bottom row first; Secure pin in "locked" position. 14-2 "LOCKED" POSITION Must hang displays on top row second; Secure pin in "locked" position. 14-3 OPTIONAL: Insert M5 x 10mm type-F socket pin screws (W) to lock latches.
-
Page 17: Display Adjustment
Display Adjustment TILT FORWARD SIDE SIDE SIDE TILT BACKWARD TILT RIGHT TILT LEFT SIDE DOWN ROTATE LEFT ROTATE RIGHT 2014-05-30 #:009-9084-8 (2018-06-15) - Page 18 2014-05-30 #:009-9084-8 (2018-06-15)
- Page 19 16-1 1/8" (3mm) W (2) 16-2 TIGHTEN CONNECTING HARDWARE 2014-05-30 #:009-9084-8 (2018-06-15)
- Page 20 V (24) C (6) 2014-05-30 #:009-9084-8 (2018-06-15)
- Page 21 Route cables through cord brackets. 2014-05-30 #:009-9084-8 (2018-06-15)
-
Page 22: Display Removal
19-1 Display Removal Pull down on bracket cords and hold. Swing screen away from cart and lift to remove. 19-2 Remove displays from top row first. "UNLOCKED" POSITION 2014-05-30 #:009-9084-8 (2018-06-15) - Page 23 19-3 Remove displays from bottom row last. "UNLOCKED" POSITION 2014-05-30 #:009-9084-8 (2018-06-15)
-
Page 24: Limited Five-Year Warranty
(from date of the original installation of the product). At its option, Peerless-AV will repair or replace, or refund the purchase price of, any product which fails to conform with this warranty.