Advertisement

Quick Links

DS-C555-4X2
46" - 55"
800 lb
MAX
(117 - 140cm)
(363 kg)
ENG
1
2014-06-20 #:009-9085-2.1 (2014-07-28)

Advertisement

Table of Contents
loading

Summary of Contents for peerless-AV DS-C555-4X2

  • Page 1 DS-C555-4X2 46" - 55" 800 lb (117 - 140cm) (363 kg) 2014-06-20 #:009-9085-2.1 (2014-07-28)
  • Page 2 This page intentionally left blank. 2014-06-20 #:009-9085-2.1 (2014-07-28)
  • Page 3 WARNING Do not begin to install product until you have read and understood the instructions and warnings contained in this user guide. Always use an assistant or mechanical lifting equipment to safely lift and position equipment. This product must be installed onto flat, hard, level surface to prevent tipping. The cart or stand is not affixed or secured to the floor, and may therefore tip over and/or fall if screen and/or stand is shaken or hit.
  • Page 4: Table Of Contents

    Parts (Before beginning, make sure you have all parts shown below). Parts List Description Part # caster, 5" swivel 600-0026 caster support 145-T1799 cover 145-T1809 base leg 145-T1767 horizontal leg support 145-T1785 base support tube 145-T1812 base support 560-T1261 vertical leg support 145-T1777 adaptor bracket 145-T1792...
  • Page 5 L ( 1 ) M ( 1 ) computer cover computer shelf N ( 4 ) dual cross support O ( 6 ) locking tab P ( 6 ) cord bracket Q ( 2 ) bracket, 4x2 configuration R ( 180 ) S ( 108 ) M8 x 16mm M8 square nut...
  • Page 6: A ( 6 )

    Repeat for each caster assembly. (5mm) R (4) Do not fully tighten hardware S (2) R (2) SIDE VIEW 2014-06-20 #:009-9085-2.1 (2014-07-28)
  • Page 7 Repeat for each base leg S (2) assembly. (5mm) S (2) R (4) S (2) S (2) R (4) 2014-06-20 #:009-9085-2.1 (2014-07-28)
  • Page 8: C ( 9 )

    Repeat for each base leg assembly. TIGHTEN CONNECTING HARDWARE Repeat for each base support (x12). Do not fully tighten hardware S (4) R (4) SIDE VIEW 2014-06-20 #:009-9085-2.1 (2014-07-28)
  • Page 9 TIGHTEN CONNECTING Repeat for each side (x2). HARDWARE TIGHTEN CONNECTING Assemble middle support bracket. HARDWARE 2014-06-20 #:009-9085-2.1 (2014-07-28)
  • Page 10: E ( 2 )

    TIGHTEN CONNECTING HARDWARE LOCK WHEELS Repeat for each vertical support bracket (x4). 1/8" 1/8" S (4) (3mm) (3mm) R (6) 2014-06-20 #:009-9085-2.1 (2014-07-28)
  • Page 11: Q ( 2 )

    Use metric formula below and diagram to right to determine hole pattern required for center vertical support bracket. Repeat (x2). All dimensions are metric. BACK OF DISPLAY Use the outside mounting holes when… a x 4 > 4368mm and a x 3 + b < 4318mm S (8) R (12) Use the inside mounting holes when…...
  • Page 12 TIGHTEN CONNECTING HARDWARE 2014-06-20 #:009-9085-2.1 (2014-07-28)
  • Page 13 TIGHTEN CONNECTING HARDWARE R (2) S (2) 2014-06-20 #:009-9085-2.1 (2014-07-28)
  • Page 14 TIGHTEN CONNECTING HARDWARE OPTIONAL: Unlock wheels to move cart to desired location; Lock wheels before hanging screens. LOCK WHEELS TOP VIEW 2014-06-20 #:009-9085-2.1 (2014-07-28)
  • Page 15 Center adaptor brackets vertically on back of screen. .98" (25mm) 7.87" (200mm) 3.94" (100mm) 2.50" 15.75" (63mm) (400mm) 2.50" (63mm) 0.91" (23mm) (4mm) 2014-06-20 #:009-9085-2.1 (2014-07-28)
  • Page 16 16-1 Must hang displays to bottom row first; Secure pin in "locked" position. "LOCKED" POSITION 16-2 Must hang displays on top row last; Secure pin in "locked" position. "LOCKED" POSITION 2014-06-20 #:009-9085-2.1 (2014-07-28)
  • Page 17 16-3 OPTIONAL: Insert M5 x 10mm type-F socket pin screws to lock latches. 2014-06-20 #:009-9085-2.1 (2014-07-28)
  • Page 18: T ( 36 )

    Display Adjustment TILT FORWARD SIDE SIDE SIDE TILT BACKWARD TILT RIGHT TILT LEFT SIDE DOWN ROTATE LEFT ROTATE RIGHT 2014-06-20 #:009-9085-2.1 (2014-07-28)
  • Page 19: U ( 18 )

    1/8" (3mm) U (2) TIGHTEN CONNECTING HARDWARE 2014-06-20 #:009-9085-2.1 (2014-07-28)
  • Page 20 T (4) 2014-06-20 #:009-9085-2.1 (2014-07-28)
  • Page 21: P ( 6 )

    Route cables through cord brackets. 2014-06-20 #:009-9085-2.1 (2014-07-28)
  • Page 22 Display Removal Pull down on bracket cords and hold. Swing screen away from cart and lift to remove. Remove displays from top row first. "UNLOCKED" POSITION 2014-06-20 #:009-9085-2.1 (2014-07-28)
  • Page 23 Repeat step 21 to remove displays from bottom row last. "UNLOCKED" POSITION 2014-06-20 #:009-9085-2.1 (2014-07-28)
  • Page 24 ® This warranty gives specific legal rights, and you may also have other rights which vary from state to state. Peerless-AV Peerless-AV Europe Peerless-AV de Mexico 2300 White Oak Circle Unit 3 Watford Interchange, Ave de las Industrias 413 Aurora, IL 60502...

Table of Contents