Advertisement
Quick Links
Advertisement
Related Manuals for peerless-AV SC560FK
Summary of Contents for peerless-AV SC560FK
- Page 1 Installation and Assembly: 32" - 65" (81 - 165 cm) Kiosk Cart Models: SC560FK Max UL Load Capacity: 150 lb (68 kg) display 15 lb (6.8 kg) component 2300 White Oak Circle • Aurora, Il 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerlessmounts.com...
-
Page 2: Table Of Contents
NOTE: Read entire instruction sheet before you start installation and assembly. WARNING • Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact your local distributor. -
Page 3: Parts List
Before you begin, make sure all parts shown are included with your product. Parts List Description Qty. Part Number base 009-1223 column 009-1427 column bracket 009-1424 tilt plate 009-1423 adapter plate 201-1110 adapter bracket 201-1510 3/8-16 x 1" button socket cap screw 520-1354 3/8-16 x 1-1/2"... - Page 4 Security Adapter Bracket Fasteners M5 x 12mm (4) M6 x 12mm (4) M8 x 12mm (4) (520-1064) (520-1050) (520-1724) .75" spacer (4) (540-1059) M5 x 25mm (4) M6 x 25mm (4) M8 x 25mm (4) (520-1122) (520-1211) (520-1101) Multi-washer (4) (580-1398) 4 of 11 ISSUED: 09-30-11 SHEET #: 009-9057-3 05-23-12...
-
Page 5: Assembling Cart
Insert right leg (O) into base (A) as shown in fi gure 1.1. Then line up holes of right leg with holes in base. Fasten right leg to base using two 3/8-16 x 1-1/2" button socket cap screws (H) and two joint connectors (S), tighten using 3/16"... - Page 6 Attach column (B) to base (A) with three Attach the column bracket (C) to column (B) with 3/8-16 x 2-1/2" button socket cap screws (L) and three 3/8-16 x 1" button socket cap screws (G). three M10 lock washers (J). Tighten screws using Tighten screws using 7/32"...
- Page 7 Attach top plate (U) to adapter plate (E) with four Secure four rubber feet (W) to bottom of CPU as M10 x 15 mm penta-pin screws (Y). shown below. Tighten screws using penta-pin tool (Z). CPU MAY APPEAR DIFFERENT THAN ILLUSTRATED Secure CPU to top plate (U) using safety belt.
-
Page 8: Installing Adapter Brackets To Flat Panel Display
Installing Adapter Brackets to Flat Panel Display WARNING • Tighten screws so adapter brackets are fi rmly attached. Do not tighten with excessive force. Overtightening can cause stress damage to screws, greatly reducing their holding power and possibly causing screw heads to become detached. - Page 9 For Flat Back Display Begin with the shortest length screw, hand thread through multi-washer and adapter bracket into display as 10-1 shown below. Screw must make at least three full turns into the mounting hole and fi t snug into place. Do not over tighten.
-
Page 10: Mounting Flat Panel Display
Mounting Flat Panel Display Cable Management Hook adapter brackets (F) onto adapter plate (E). Run cables through column (B) using cable Then slowly swing display down as shown. Turn management holes. safety/security screws, using 4 mm security allen wrench (AA), clockwise at least six times to prevent display from being removed as shown in detail 1 of fi... - Page 11 LIMITED FIVE-YEAR WARRANTY Peerless Industries, Inc. (“Peerless”) warrants to original end-users of Peerless® products will be free from defects in material and workmanship, under normal use, for a period of fi ve years from the date of purchase by the original end-user (but in no case longer than six years after the date of the product’s manufacture). At its option, Peerless will repair or replace, or refund the purchase price of, any product which fails to conform with this warranty.