Table of Contents
Advertisement
Starting a programme
Touch the flashing Start/Add laundry
sensor control.
The Start/Add laundry sensor control
lights up.
Programme sequence
– If Delay start has been selected, the
Delay start time will start to count
down first.
– The programme starts.
– The Perfect Dry indicator will only
flash/light up with programmes with
selectable drying levels (see also
"Operating the tumble dryer").
– The dryer measures the residual
moisture of the laundry and calcu-
lates the required programme dura-
tion.
If a small load or dry laundry is
placed in the dryer, it is dried/aired
for a preset duration. In this case the
Perfect Dry indicator does not light
up at the end of the programme.
To prevent laundry wearing out
avoid overdrying it.
– Before the programme finishes, the
laundry is cooled.
3. Select a programme and start it
Energy savings
After 10 minutes, the indicators dim.
The Start/Add laundry sensor control
flashes slowly.
Touch the Start/Add laundry sensor
control to switch the indicators on
again (this does not have any effect
on a running programme).
Adding laundry
You can add laundry items after the
programme has started.
Follow the description in "Changing
the programme sequence – Adding or
removing laundry".
29
Advertisement
Table of Contents
