Miele TSB 143 WP Operating Instructions Manual page 14

Heat pump dryer
Table of Contents

Advertisement

Warnings and safety instructions
The heat pump that is essential to the operation of this tumble
dryer generates a great deal of heat inside its casing. There must be
a reliable means of dissipating this heat. Otherwise loads could take
longer to dry or the tumble dryer might sustain damage in the long
term.
The following mandatory requirements must be met:
– permanent room ventilation from the beginning to the end of
every drying programme
– a gap between the floor and the bottom of the tumble dryer (this
must not be blocked or obstructed in any way)
The tumble dryer must not be hosed down.
Do not let anyone sit or lean on the door, as this can cause the
tumble dryer to tip up.
In many programmes, the heating phase is followed by a cooling
down phase to ensure that the items are not too hot to handle when
you remove them (this also avoids the danger of the laundry self-ig-
niting). The programme is not finished until the cooling down phase
has been completed.
As soon as the programme has finished, remove all laundry from the
drum.
14

Advertisement

Table of Contents
loading

Table of Contents