Multi-Level Security Arming - Directed Electronics 4400 Owner's Manual

multi-level security arming

Multi-Level Security Arming allows you to select which of the
system's inputs or sensors will be active and which will be bypassed
when the system is armed. (See Table of Zones section of this
guide.) Pressing
five seconds of arming the system will activate the Multi-Level
Security feature. Each press of
level, and the transceiver will beep or vibrate once and the arm
icon (29) will flash on the LCD. The system will respond as
follows.
Press once: The siren chirps once and the system is
armed.
Press a second time within five seconds: The siren chirps
twice followed by a long chirp. Zone 2 is now bypassed.
Press a third time within five seconds: The siren chirps
three times followed by a long chirp. Zone 4 is now bypassed.
Press a fourth time within five seconds: The siren chirps
four times followed by a long chirp. Zones 2 and 4 are now
bypassed.
Press a fifth time within five seconds: The siren chirps
five times followed by a long chirp. All input zones, except
the ignition, are now bypassed.
24
(only in standard configuration) again within
will select a different security
© 2003 directed electronics, inc.