Access 3260 Series Installation & Operational Instructions page 8

Venetian dual touch pad control
Table of Contents

Advertisement

START UP AND OPERATIONAL INSTRUCTIONS
Purge Cycle:
There are two different purges: The first at 30
minutes after the tub is used and the second every
24 hours at the time determined by when power is
turned on at the breaker box.
Increase Pressure
6.
Water Jet Pressure Control
Turn control knob to increase or
decrease the speed and pressure for
the water jets. The water jets pressure
control is divided between 2 air
pressure controls on either side of the
tub.
INSTALLATION
ACCESS TOUCH PLUS
6
Decrease Pressure
CONTINUED
1.
Pump On/Off:
1st Press - the pump starts
2nd Press - the pump stops
2.
Blower On/Off:
1st Press - the blower starts
2nd Press - the blower stops
3.
Air Jet Speed (INCREASE)
4.
Air Jet Speed (DECREASE)
5.
Light Button:
1st Press - turn on light
2nd Press & Hold - turn off light
Cycling Colors - When turned on, Chromalight
will be in Cycle Mode where the colors will slowly
cylce from one to the next. To manually select your
desired color, press the button again and again
until the desired color is reached. It will stay on this
color until turned off.
7.
Aromatherapy Cap
Unscrew cap and insert your favorite
fragrance beads to bathe in a
soothing aroma scent.
6

Advertisement

Table of Contents
loading

Table of Contents