Clamp Mounting; Dmx Connection - Evolite Evo Spot 180 User Manual

Clamp Mounting:

Evo Spot 180 provides a unique mounting bracket assembly that integrates the bottom of the
base, and the safety cable rigging point in one unit (see the illustration below). When mounting
this fixture to truss be sure to secure an appropriately rated clamp to the included omega
bracket using a M10 screw fitted through the center hole of the "Hanging Kit". As an added
safety measure be sure to attached at least one properly rated safety cable to the fixture using
one of the safety cable rigging point integrated in the base assembly
o DMX Connection
DMX IN
POWER IN
Signal (-)
Signal (+)
2 1 1 2
Signal (-)
Ground
Signal (+)
120 Ω
DMX512 OUT DMX512 IN
18
Evo Spot 180 User's Manual Ver. 1.00 Page