Narrow Hemming - Necchi NC-102D Instruction Manual

Narrow hemming

The hemmer foot is used to stitch the narrow rolled hems usually found on shirt tails,
table linens and along the edge of frills.
00
1.5~3.0
Using the hemmer foot.
3.0~3.5
Fold edge of fabric over about 3mm, then fold
it over again 3mm for about 5cm along the
edge of the fabric.
①
1
Insert the needle into the fold by turning the
handwheel toward you, and lower the presser
foot lifter. Sew several stitches and raise the
presser foot lifter.
Insert the fabric fold into the spiral opening of
1
hemmer foot. Move fabric back and forth until
the fold forms a scroll shape.
①
Lower the presser foot lifter and start sewing
slowly guiding the raw edge of the fabric in
front of the hemmer foot evenly into the scroll
of the foot.
66
Wrong side
Scroll shape of the hemmer foot