Darning Stitch - Necchi NC-102D Instruction Manual

Darning stitch

Darning a small hole or a tear before it becomes larger can save a garment. Choose a fine
thread in a color as color as close to your garment possible.
30
4
1
2
3
1
1
Using the buttonhole foot.
Baste the upper fabric and the under fabric
together.
①
Basting
1
The size of one darn cycle is variable.
However, the maximum stitch length is 2.6cm
and the maximum stitch width is 7mm.
①
The length of sewing
②
The width of sewing
③
Star
④
Stop
Extend the button holder plate and set to the
desire length. Adjust the stitch width and the
stitch length to the desired width and density.
Attach the buttonhole foot. The thread should
be passed through the hole in the presser
foot, then be placed under the foot.
①
Button holder plate
Position the fabric so that the needle is 2mm
in front of the area to be darned, and then
lower the presser foot lifter.
①
2mm
52