Table of Contents

Advertisement

Quick Links

W
A
!
E L C O M E
B O A R D
T
C
A B L E O F
O N T E N T S
C
1 : C
H A P T E R
Owner's Packet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Dealer's Responsibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Consumer Responsibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Hazard Warning Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
C
2 : S
H A P T E R
Required Safety Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Additional Recommended Equipment . . . . . . . . . . . . . . . . . . . . . . . 2-1
Registration Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Emergency Stop Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Emergency Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Boating Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Loading Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Carbon Monoxide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Suggested Boating Classes And Reading Material . . . . . . . . . . . . . . 2-6
C
3 : G
H A P T E R
Fueling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Fuel System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Fuel Select Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Pollution Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Discharge of Oil or Hazardous Substances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Disposal of Plastics or Garbage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Trailering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Predeparture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Casting Off & Approaching The Dock . . . . . . . . . . . . . . . . . . . . . . . 3-5
Anchoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Shallow Water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Windlass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
General Information On Boat Handling . . . . . . . . . . . . . . . . . . . . . . 3-7
Twin Engine Boats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
Commonly Used Nautical Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
C
4 : P
H A P T E R
Performance Factors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Engine Efficiency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Weather Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Load Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Marine Growth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Propeller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
T
A B L E O F
C
O N T E N T S
O N S U M E R
E N E R A L
T
A B L E O F
C
O N T E N T S

Advertisement

Table of Contents
loading

Summary of Contents for Grady-White Tournament 275

  • Page 1: Table Of Contents

    A B L E O F O N T E N T S A B L E O F O N T E N T S E L C O M E B O A R D A B L E O F O N T E N T S 1 : C H A P T E R...
  • Page 2 A B L E O F O N T E N T S Propulsion System – Outboard ......4–3 Engine Warranty .
  • Page 3 A B L E O F O N T E N T S After Launching ........7–4 8 : 2 7 5 T H A P T E R O U R N A M E N T...
  • Page 4 A B L E O F O N T E N T S 9 : L H A P T E R I M I T E D A R R A N T Y Registration Of Purchase: ....... . 9–1 Five Year Hull Transferable Warranty .
  • Page 5: Information

    Grady-White Boat, the dealer will fill out a warranty card. This card will be kept on file at the dealership and at the Grady-White factory. A copy will be provided for your records and should be kept with other valuable documents for future reference. For questions regarding your warranty please contact your dealership.
  • Page 6: Consumer Responsibilities

    • Return the boat to the selling dealer for an engine inspection. Refer to the engine’s owner’s manual for the proper maintenance schedule. Grady-White Boats has a permanent record of your boat which is retained under its “Hull Identification Number” (HIN). Data regarding equipment and accessories, as well as dealer/ shipping information is documented.
  • Page 7: Hazard Warning Labels

    E L C O M E AZARD ARNING ABELS The hazard warning labels shown below are applied throughout this manual to alert the customer of potentially dangerous situations that can lead to death, personal injury, and/or product damage. We urge you to observe these warnings and comply with all safety recommendations. D A N G E R This symbol alerts you to imminently hazardous situations which will cause severe personal injury or death if the warning is ignored.
  • Page 8 E L C O M E 1–4...
  • Page 9: A F E T Y

    Children and non-swimmers are advised to wear a PFD at all times. • Sound Signaling Device (Horn, Bell Or Whistle) Your Grady-White is equipped with a horn that meets USCG requirements. • Visual Distress Signals USCG approved visual distress signals are required on U. S. waters. See page 33 of the pamphlet Sportfish, Cruisers, Yachts Owner’s Manual enclosed with this manual for more...
  • Page 10: Emergency Stop Switch

    A F E T Y MERGENCY WITCH All Grady-Whites are equipped with an emergency stop switch. This is a safety feature that if used properly will shut the engine(s) down if the operator leaves or falls from the helm position. The ignition shutdown system includes a shut-off switch, switch clip, lanyard and lanyard clip.
  • Page 11: Boating Safety Tips

    • Before operating your Grady-White READ AND STUDY ALL OPERATION AND MAINTENANCE MANUALS. It is important that you fully understand how to use your boat. Contact your Grady-White dealer for questions. Proper use and service will insure quality performance and longevity of your boat.
  • Page 12: Certification

    With this tag, you can have confidence in the safety of your boat. This label means that Grady-White has designed and built your boat to the ABYC standard H-8, buoyancy in the event of swamping. Basic flotation is defined as having enough foam in the boat to create buoyancy and prevent sinking under swamped conditions.
  • Page 13: Carbon Monoxide

    A F E T Y ARBON ONOXIDE W A R N I N G (CO) is produced by all combustion engine(s) and generator sets. Avoid brain damage or death from carbon monoxide. Keep cockpit and cabin areas well ventilated. Avoid blockage of exhaust outlets. Signs of exposure include headache, nausea, dizziness and drowsiness.
  • Page 14: Suggested Boating Classes And Reading Material

    A F E T Y UGGESTED OATING LASSES EADING ATERIAL Like a car, boats must be operated according to safety rules and traffic regulations. Although we include some basic boating tips in this manual, a thorough review of the safety rules and regulations for boating is beyond the scope of this text.
  • Page 15: I N F O R M A T I O N

    E N E R A L N F O R M A T I O N C h a p t e r 3 : G e n e r a l I n f o r m a t i o n UELING W A R N I N G Safety during fueling requires CAUTION and COMMON SENSE.
  • Page 16: Fuel System

    E N E R A L N F O R M A T I O N •If your boat is equipped with two fuel tanks use the fuel select valve (see “Fuel Select Valve” on page 3–3) to select the main or aux tank. Select the tank to be used first taking into consideration the distribution of your load as fuel is consumed.
  • Page 17: Fuel Select Valve

    E N E R A L N F O R M A T I O N ELECT ALVE If your boat is equipped with dual fuel tanks, you will have a manual fuel select valve installed. This valve allows you to choose from which tank fuel will be consumed. Remember, as the fuel is consumed and the fuel load redistributes the performance will be influenced.
  • Page 18: Discharge Of Oil Or Hazardous Substances

    E N E R A L N F O R M A T I O N Discharge of Oil or Hazardous Substances The Federal Water Pollution Control Act prohibits the discharge of oil or hazardous substances, which may be harmful, into or upon U.S. navigable waters. Vessels 26 feet in length or over must display a placard at least 5”...
  • Page 19: Predeparture

    E N E R A L N F O R M A T I O N Practice maneuvering the trailer; the trailer always backs in the opposite direction of the vehicle. To maneuver the trailer, turn the steering wheel in the direction you want the trailer to go. Familiarize yourself with this manual and all aspects of your boat prior to initial launch.
  • Page 20: Towing

    E N E R A L N F O R M A T I O N OWING In the event of a mishap or power loss you may need to tow a boat or be towed. You should not tow a boat larger than your own. Always use safety and good judgement when towing. Never tow a boat if you are not equipped with the proper lines.
  • Page 21: Windlass

    E N E R A L N F O R M A T I O N INDLASS Anchoring can be less laborious if your boat has a windlass accessory. If your boat is equipped with a windlass, reference your windlass Operation Manual for instructions. ENERAL NFORMATION ANDLING...
  • Page 22: Commonly Used Nautical Terms

    E N E R A L N F O R M A T I O N OMMONLY AUTICAL ERMS Access Plate Port Side Stern Beam Gunwale Starboard Side Bow Eye Chine Keel Abeam - a line perpendicular to a Deck - upper structure which covers Lee - the side that is sheltered from boat’s keel the hull...
  • Page 23: E R F O R M A N C E

    E R F O R M A N C E C h a p t e r 4 : P e r f o r m a n c e ERFORMANCE ACTORS Maximum performance is dependent on many factors and cannot be guaranteed. These factors will vary with changing conditions.
  • Page 24: Propeller

    E R F O R M A N C E Propeller The condition of your prop has a major influence on the performance of your boat. Your engine(s) should be equipped with the best size prop for normal conditions. Unusual uses or weight conditions may require special props.
  • Page 25: Propulsion System - Outboard

    E R F O R M A N C E – O ROPULSION YSTEM UTBOARD The engine manufacturer supplies all vital information concerning your engine(s) in the Operation and Maintenance Manual(s). Details of important engine functions such as the lubrication system, cooling system, and alarm/monitoring system are outlined in these manuals. Your familiarization with this engine reference material will result in the proper usage and service essential for safe and enduring engine performance.
  • Page 26: Steering

    E R F O R M A N C E TEERING Most outboard engines are equipped with an adjustable rudder trim tab. This trim tab should be adjusted to balance the steering at the speed which you travel most frequently. Variations in speed, boat load or engine trim will cause the steering to pull in one direction.
  • Page 27: Throttle/Shift Control

    E R F O R M A N C E HROTTLE HIFT ONTROL The throttle/shift controls located at the helm station control the flow of fuel to the engine. They also act as gear shift levers to control the forward and aft thrust of the propellers. The middle position of the throttle control is the neutral position.
  • Page 28 E R F O R M A N C E 4–6...
  • Page 29: Yamaha Instrumentation Panel

    C h a p t e r 5 : I n s t r u m e n t a t i o n a n d S w i t c h e s AMAHA NSTRUMENTATION ANEL Grady-White installs full Yamaha Command Link instrumentation on pre-rig boats. The instruments are powered by the ignition key(s) and will operate when the ignition switch(es) is in the “on” position. IGITAL...
  • Page 30: Digital Tachometer

    N S T R U M E N T A T I O N A N D W I T C H E S • Speedometer This feature indicates boat speed in miles per hour, knots per hour, or nautical miles per hour. On boats with V8 engines, this gauge must be interfaced with a GPS.
  • Page 31: Switch Panel

    N S T R U M E N T A T I O N A N D W I T C H E S WITCH ANEL At the helm station you will find an accessory switch panel. Not all boats are equipped with the same accessories.
  • Page 32 N S T R U M E N T A T I O N A N D W I T C H E S 5–4...
  • Page 33: Chapter 6 : M A I N T E N A N C E A N D S E R V I C E

    IBERGLASS INISH The exterior finish of your Grady-White is a thin layer of resin with a finished color pigment called gel-coat. It is used for cosmetic purposes and makes routine maintenance relatively simple. Although gel-coat has a hard smooth surface, it does contain microscopic pores that will allow surface discoloration if not kept clean.
  • Page 34: Finish/Waxing

    A I N T E N A N C E A N D E R V I C E Finish/Waxing Gel-coat will age or dull naturally due to constant exposure to the natural environment and pollutants. Discolorations are shallow in depth. Factors that will affect the rate of discoloration are: the sun, pollution, old wax accumulation, and the salt content of water.
  • Page 35: Repairing

    The canvas will not be completely leak proof. The seam holes in your canvas may stretch and tend to leak. However, you can correct this problem by applying *Apseal® or Uniseal™ to the seams. Please understand that Grady-White does not warrant the fit and design of the canvas to be entirely watertight.
  • Page 36: Snaps And Zippers

    A I N T E N A N C E A N D E R V I C E Snaps And Zippers To protect the snaps and zippers on your boat’s canvas and cushions from corrosion and binding, Grady White includes a snap/zipper assist tool and a tube of lubricant (E-Z Snap™) in your owner’s packet.
  • Page 37: Upholstery

    TEEL AILS The hardware on your Grady-White is made of laboratory grade 316 stainless steel and needs regular cleaning to maintain its “less staining” properties. The key to maintaining your stainless steel is to keep it clean with a mild solution of soap and FRESH water. Remove salt or dirt from your stainless steel on a regular basis.
  • Page 38: Hardware Mounting

    A I N T E N A N C E A N D E R V I C E ARDWARE OUNTING Ensure all holes are sealed properly when mounting hardware in the boat surface. Sealing will prevent water leakage. This is crucial in fiberglass areas that have been reinforced with plywood. A hole sealed improperly allows water inside the fiberglass leading to saturation of the plywood reinforcement.
  • Page 39: Fuel Tank Compartment

    ATTERIES Proper battery power is essential to the operation of your vessel. For this reason, Grady-White has carefully chosen a battery with cranking ability and reserve capacity sufficient to meet your needs. The factory installed Deka Marine Master 27M6 battery is a maintenance free battery. This battery utilizes an exclusive demineralized electrolyte and maintenance free calcium alloy grids.
  • Page 40 A I N T E N A N C E A N D E R V I C E This is not a complete set of guidelines. It is your responsibility to safely maintain your batteries and avoid injury. Use good judgement and remain alert to prevent an accident. In the event of an accident or exposure to electrolyte, immediately seek prompt medical advice or attention.
  • Page 41: Light Bulb Replacement Guide

    All of the lights shown may not be used on every model boat. If you have difficulty finding replacement bulbs under the part numbers listed, contact your Grady-White dealer for further assistance. Always use the specified replacement bulb. Improper substitution my result in electrical malfunction, insufficient lighting, boat damage or personal injury.
  • Page 42: Accessory Wiring Color - Fuse/Breaker Sizes

    A I N T E N A N C E A N D E R V I C E – F CCESSORY IRING OLOR REAKER IZES 180-283 & 306 DC Wiring Chart Together Delivering the Ultimate Boating Experience! Accessory Wire Size & Color Amperage Fuse/Breaker Location Lights Aft Pole Light 14 ga.
  • Page 43: Chapter 7 : W I N T E R I Z A T I O N A N D S T O R A G E

    Manual for a checklist on winterizing and storage. TORAGE Grady-White boats are equipped with stern eyes and a bow eye. These eyes are for anchoring and trailering purposes, and should be inspected regularly to insure structural integrity. W A R N I N G The boat should not be lifted for storage using the bow and stern eyes.
  • Page 44: Cleaning And Lubricating The Boat

    I N T E R I Z A T I O N A N D T O R A G E For outdoor storage, a canvas cover should be used to prevent “sweating”. One method is to build a frame over the boat to support the canvas. It should be a few inches wider than the boat so the canvas will clear the rails and allow passage of air.
  • Page 45: Batteries

    I N T E R I Z A T I O N A N D T O R A G E Drain portable heads. Remember to drain the upper and lower tanks. Water should be removed from deck pump-out lines. ATTERIES Fully charge the battery before storing.
  • Page 46: Getting Boat Out After Storage

    I N T E R I Z A T I O N A N D T O R A G E • Remove any detachable and valuable equipment such as electronics. Store all electronics inside. Your compass should be covered for the winter. Ultraviolet rays from the sun will cloud the compass and make it difficult to read.
  • Page 47 I N T E R I Z A T I O N A N D T O R A G E • Check operation of toilet (reference manufacturer’s manual). • Test run engines as directed in manufacturer’s manual. 7–5...
  • Page 48 I N T E R I Z A T I O N A N D T O R A G E 7–6...
  • Page 49: Accessories

    2 7 5 T O U R N A M E N T C h a p t e r 8 : 2 7 5 To u r n a m e n t S p e c i f i c a t i o n s Beam-amidship.....................
  • Page 50: Switch Panel

    2 7 5 T O U R N A M E N T O p e r a t i o n O f S t a n d a r d F e a t u r e s WITCH ANEL At the helm you will find an accessory switch panel.
  • Page 51: Auxiliary Fuse Panel

    2 7 5 T O U R N A M E N T recommended breaker amperages. Switch labels are available from your dealer for non- factory installed options. N O T I C E Use anti-corrosion spray on the back of panels and on exposed wires to prevent the rust of corrosion that could lead to an electrical system failure.
  • Page 52: Accessory Outlet - 12 Volt

    2 7 5 T O U R N A M E N T - 12 V CCESSORY UTLET The two 12-volt outlets on your 275 provide easily accessible power supplies for accessories such as cellular phones and spotlights. These outlets are located in the port and starboard deckwing inserts.
  • Page 53: Battery Select Switch

    2 7 5 T O U R N A M E N T ATTERY ELECT WITCH The 275 Tournament is equipped with two batteries and two select switches. An outboard engine should be connected to each battery select switch. Either engine may be started with either battery bank by selecting position “1”...
  • Page 54: Seacocks

    2 7 5 T O U R N A M E N T EACOCKS Ball valve seacocks are installed on the thru hulls for the livewell, washdown, and some head features. It is necessary for the seacocks to be in the open position for operation. The open position is identified by the orientation of the handle.
  • Page 55: Trim Tabs

    2 7 5 T O U R N A M E N T Trim tabs are electrically and hydraulically operated. The trim tab system consists of trim tab planes attached to the hull, a hydraulic pump, a two-rocker switch panel, a trim tab position indicator panel, and an auto-retract device.
  • Page 56: Livewell - Raw Water

    2 7 5 T O U R N A M E N T O p e r a t i o n O f O p t i o n a l F e a t u r e s IVEWELL ATER To operate the livewell, open the seacock with the livewell I.D.
  • Page 57: Sliding Lounge Seat

    2 7 5 T O U R N A M E N T LIDING OUNGE The lounge seat option includes a sliding seat bottom. This allows for the seat to be adjusted to supply more seating area for passengers when extended or maximize cockpit space when retracted.
  • Page 58: Outriggers

    2 7 5 T O U R N A M E N T UTRIGGERS The optional outriggers spread the fishing lines being trolled from your boat and decrease the chance of entanglement. • Advantages Advantages of outriggers include offering bait throughout a larger area behind the boat, placing bait out of the wake zone, automatic drop back following strikes (which allows for fish to completely accept bait), and a reduction in unnecessary twisting action characteristic of artificial bait.
  • Page 59: Head Operating Instructions

    2 7 5 T O U R N A M E N T PERATING NSTRUCTIONS Marine Head (W/ Hand Pump) Operation 1. Open the marine head inlet seacock by pulling up on the remote arm. This seacock is in the forward bilge and is labeled “Head Inlet”.
  • Page 60: Portable Head Operation

    2 7 5 T O U R N A M E N T Portable Head Operation 1. The upper fresh water reservoir must be filled with water prior to use. 2. Compress the bellows pump located on the left corner of the toilet a few times to add water to the bowl.
  • Page 61: Access Plate And Rigging Tube Location

    2 7 5 T O U R N A M E N T I n f o r m a t i o n a l D r a w i n g s A c c e s s P l a t e A n d R i g g i n g T u b e L o c a t i o n Description 3"...
  • Page 62: Accessory Wiring

    2 7 5 T O U R N A M E N T A c c e s s o r y W i r i n g Anchor Windlass Red LED Cockpit Light Wiper Motor Fresh Water Pump & Strainer 1100 gph Bilge Pump Horn Marine Stereo...
  • Page 63: Fuel System

    2 7 5 T O U R N A M E N T F u e l S y s t e m Fuel Fill & Vent Fuel Filters Primer Bulbs 8–15...
  • Page 64: Typical Outboard Switch Panel Wiring

    2 7 5 T O U R N A M E N T T y p i c a l O u t b o a r d S w i t c h P a n e l W i r i n g Orange - Power Source Orange Black...
  • Page 65: Battery Wiring With Select Switches (Single)

    2 7 5 T O U R N A M E N T B a t t e r y W i r i n g w i t h S e l e c t S w i t c h e s ( S i n g l e ) 4 ga Red: Engine Cranking Lead Battery #1 Battery #1...
  • Page 66: Battery Wiring With Select Switches (Dual)

    2 7 5 T O U R N A M E N T B a t t e r y W i r i n g w i t h S e l e c t S w i t c h e s ( D u a l ) Battery #1 Battery #2 2 ga Red...
  • Page 67: Freshwater System

    2 7 5 T O U R N A M E N T F r e s h w a t e r S y s t e m Fresh Water Pump and Strainer Water Fill & Vent 20 Gallon Water Tank Wet Bar Drain Wet Bar Pull-out...
  • Page 68: Safety Labels And Location

    2 7 5 T O U R N A M E N T S a f e t y L a b e l s A n d L o c a t i o n CAUTION TO AVOID PERSONAL INJURY, KEEP HANDS FREE OF WINDLASS AND ROPE WHEN OPERATEING CAUTION...
  • Page 69: Livewell/Washdown Layout

    2 7 5 T O U R N A M E N T L i v e w e l l / Wa s h d o w n L a y o u t Washdown Pump Washdown Outlet 1100 gph Livewell Inlet Livewell Pump Livewell Drain...
  • Page 70: Livewell/Washdown System

    2 7 5 T O U R N A M E N T L i v e w e l l / Wa s h d o w n S y s t e m To Washdown Fitting To Livewell Washdown Pump Strainer Pump...
  • Page 71: Marine Head

    2 7 5 T O U R N A M E N T M a r i n e H e a d Vent 3/4" Vented Loop Deck Pump Out 10 Gallon Holding Tank Head Inlet Seacock Discharge Seacock 8–23...
  • Page 72: Portable Head With In-Line Macerator

    2 7 5 T O U R N A M E N T P o r t a b l e H e a d W i t h I n - l i n e M a c e r a t o r Vent Y-Valve Deck Pump Out...
  • Page 73: Stereo System Layout

    2 7 5 T O U R N A M E N T S t e r e o S y s t e m L a y o u t 6 1/2" Speakers Sirius Antenna with 25' cable 10A Fuse on 6m Remote stereo positive Extension...
  • Page 74: Thru Hull Detail

    2 7 5 T O U R N A M E N T T h r u H u l l D e t a i l Description Head Vent Livewell Drain/Overflow Scuppers Aft Bilge Fishbox Drain Wet Bar Drain Forward Bilge Starboard Forward Box Drain 8–26...
  • Page 75 Any structural defects covered by the warranty will be repaired free of charge at either the Grady-White factory in Greenville, North Carolina, or at an authorized Grady-White dealer location as elected by Grady-White. Transportation to and from the point of repair will be the responsibility of the owner with all repairs subject to prior written authorization by Grady-White Boats, Incorporated.
  • Page 76 LAIM ROCEDURES Upon the discovery of a defect, the owner is to promptly contact the Grady-White dealer from whom the original retail purchaser purchased the boat who will effect the corrective action under this warranty upon prior written authorization from Grady-White Boats, Incorporated.
  • Page 77 Why did you sell this boat? _____________________________ 5a. In which of the following ways do you use your Grady-White? (Please mark all applicable in column A.) 5b. In which one way do you use your Grady-White most often? (Please mark one only in column B.)
  • Page 78 Which of the following most influenced your selection of a Grady-White boat? (Please pick three or fewer reasons.) About Grady-White Grady-White's overall reputation Previous experience with a Grady-White About the boat itself Cockpit layout Hull design/ride Resale value Safety/seaworthiness Styling...

Table of Contents