Table of Contents
Advertisement
Parameter
View/Configure Turbo Options
Description
Press [Enter] to view/configure Turbo Options.
Energy Efficient P-state
Š
– Enable/Disable Energy Efficient P-state feature.
– Options available: Enabled/Disabled. Default setting is
Enabled.
Package Power Limit MSR Lock
Š
– Enable/Disable locking of package power limit settings.
When enabled, PACKAGE_POWER_LIMIT MSR will be
locked and a reset will be required to unlock the register.
– Options available: Enabled/Disabled. Default setting is
Disabled.
PL1 Limit
Š
– Enable/Disable PL1 limit feature. If this option is disabled,
BIOS will program the default values for PL1 Power Limit
and PL1 Time Window.
– Options available: Enabled/Disabled. Default setting is
Disabled.
PL1 Power Limit
Š
– Configures PL1 power limit in Watts. The value may vary
from 0 to fused value. If the value is 0, the fused value will
be programmed. A value greater than fused TDP value will
not be programmed.
PL1 Time Window
Š
– Configures PL1 value in seconds. The value may vary from
0 to 56. Indicated the time window over which TDP value
should be maintained. if the value is 0, the fused value will
be programmed.
Power Limit 2 Override
Š
– Enable/Disable power limit 2 override. If this option is
disabled, BIOS will program the default values for Power
Limit 2.
– Options available: Enabled/Disabled. Default setting is
Enabled.
Power Limit 2
Š
– Configures PL2 power limit in Watts. The value may vary
from 0 to fused value. If the value is 0, BIOS programs
120% * TDP.
#1/2/3/4-Core Ratio Limit Override
Š
– Configures #-Core Ratio Limit with range 0 to 83. The
minimum rang may vary between processors.
– The 1-Core Ratio Limit must be greater than or equal to
2-Core Ratio Limit, 3-Core Ratio Limit, 4-Core Ratio Limit.
- 97 -
BIOS Setup
Advertisement
Table of Contents
