Table of Contents
Advertisement
3-2
Installing the Liquid Cooling Module
Before you remove or install the liquid cooling module:
• Make sure the system is not turned on or connected to AC power.
Follow these instructions to install the liquid cooling module:
1.
Remove the screws securing brackets .
2.
Remove the brackets from the system.
3.
Engage the brackets and radiators.
4.
Secure the brackets and radiators with 6 screws.
5.
Lock the four spring screws.
NOTE! Remove the pump grease protection cover before installing the pump.
6.
Install the fan duct and secure with 2 screws.
7.
Connect pump cable to motherboard.
1
1
2
4
3
- 21 -
4
System Hardware Installation
Advertisement
Table of Contents
