Ac Electrical Connections; Preparing To Charge - Mäktig 710135 Owner's Manual

4. AC ELECTRICAL CONNECTIONS

PLUGGING IT IN
Your charger requires a 3-pin, grounded 120 V AC electrical wall outlet
receptacle installed according to local codes and ordinances.
WARNING: Never alter AC cord or plug provided. If it does not fit the
outlet, have a proper outlet installed by a qualified electrician. Improper
connection can result in a risk of fire or electric shock.
WARNING: Do not operate the charger if it has a damaged power
cord or plug. Have the cord replaced.
USING AN EXTENSION CORD
The use of an extension cord is not recommended. If an extension cord
must be used, follow these guidelines:

Make sure that the pins on the charger's power cord fit firmly into the
extension cord and that the extension cord fits firmly into the
receptacle.

Check that the extension cord is properly wired and in good
electrical condition.

Make sure that the wire size is large enough for its length and for the
AC ampere rating of the charger, as specified in the chart below.
MINIMUM RECOMMENDED EXTENSION CORD
Length of Cord, Metres (Feet)
AWG* Size of Cord
*AWG=American Wire Gauge
WARNING: Use of an improper extension cord could result in a risk of
fire and electric shock.

5. PREPARING TO CHARGE

CHARGER LOCATION

Do not expose charger to rain or snow.

Locate the charger as far away from the battery being charged as
the cables will permit.
7.6 15.2
(25) (50)
18 16
6
30.5 45.6
(100) (150)
12 10