Mäktig 710135 Owner's Manual page 11

ensure the battery will reach 100% of its capacity. Optimal
Charge logic automatically selects the ideal charge rate for your
battery. In Optimal Charge mode, the charger starts charging at
a low, safe current. Gradually, the charger increases current as
the battery demonstrates it can accept a higher current. The
result is a battery safely charged to its utmost capacity.

12 A or 25A Charge Rate – Use for faster charging of small-to-
large capacity automotive, marine, deep cycle and farm tractor
batteries.

4 A Charge Rate – Use for slow charging small-to-large capacity
automotive, marine, deep cycle and farm tractor batteries. Also
for garden tractor batteries.

2 A maintainer mode – Use to maintain the battery's capacity.
CHARGER FEATURES
OPTIONAL CONNECTION METHODS
This charger comes with 2 run connect charging leads for extra versatility
– standard clamps and ring terminals. The battery may be charged using
any of the two connection options.
Warning: you can only select one charging method for charging.
CHARGE STATUS INDICATOR
A blinking green LED indicates that the battery is being charged. A solid
green LED indicates that the battery is fully charged or that the charger is
in Maintenance mode.
AUTOMATIC SHUT OFF
The battery charger is designed to automatically shut off once battery
charging is complete to prevent overcharging. When charging is
complete, the Charge Status LED will stop blinking and the digital display
will read "FUL".
COMPLETION OF CHARGING
Charge completion is indicated when the Charge Status LED stops
blinking and illuminates continuously (green). The digital display will also
show a "FUL" message. The charger has stopped charging and switched
to Maintenance mode.
MAINTENANCE MODE
11