Using The Directory; Store An Entry; Dial An Entry - BT Freestyle 350 User Manual

20 Using the phone
Entering names
When entering a name, the characters
available for each key are displayed
when the relevant button is pressed.
Use the keypad letters to enter names,
e.g. to store TOM:
Press once to enter T.
Press three times to enter O.
Press once to enter M.
Writing tips
Press Del to delete the last digit.
Press to enter a space.
Press to switch between upper
and lower case letters and numbers.
Use , and
punctuation characters.
Entering numbers
Make sure you enter the full telephone
number including the dialling code if
you subscribe to a Caller Display
service and want the name of your
caller displayed instead of the number.
To enter a pause within a telephone
number when storing a directory
entry, press and hold
be displayed.
If you experience any problems, please call the Helpline on 0870 240 3962 or email bt.helpdesk@vtecheurope.com
BT Freestyle 350 – Issue 2 – Edition 01 – 08.01.07 – 7971

Using the directory

You can store up to 100 entries in the directory. Each entry
contains a name and number. Names can be up to 15
characters long and numbers up to 24 digits.

Store an entry

1. Press
2. When storing the first entry:
The display shows
Press OK.
When storing further entries:
The first entry is displayed. Press Opt.
Press OK.
to enter other
3. Enter the phone number and press OK.
4. Enter the name and press Save.

Dial an entry

1. Press
Or to search alphabetically, press the relevant keypad button,
and a P will
e.g. for 'Tom', press
2. Press
to open the directory.
. Press Opt.
Empty
and scroll or to the entry you want to dial.
then scroll through the entries under T.
. The number is displayed and dialled.
is displayed.
New entry
is displayed.
New entry