System Cable Removal - RIDGID SeeSnake Compact C40 Operator's Manual

System Cable Removal

1. Disconnect the system cable from the reporting
monitor and remove the monitor from the docking
system.
2. Unwrap the system cable from the cable wraps.
3. Pop the frame cable anchor off the frame and un-
hook the system cable from the frame hook.
Cable Anchor
4. Turn the slip-ring dial counter-clockwise to the un-
locked position .
5. Pull straight out.
Do not touch the contact pins inside the
NOTICE
slip-ring dial. Stressing the contact pins
can cause them to break.
Broken Contact Pin
System Cable Installation
To install the system cable, follow these steps:
1. Align the arrow on the slip-ring dial with the unlock
symbol
into the slip-ring cavity.
2. Turn the slip-ring dial to the locked position .
Frame Hook
3. Hook the system cable into the frame hook and snap
the cable anchor onto the frame.
4. Wrap the system cable around the cable wraps.
on the frame and insert the slip-ring dial
Compact C40 – English – 11