Assembly Instructions - Kenmore SSV Complete 125.10441710 Use & Care Manual

Before assembling the vacuum cleaner, check the PACKING LIST (Page 2). Use list
to verify that you have received all the components of your new Kenmore Elite SSV
Complete Cyclonic Multi-Vac.
1. Insert the telescoping wand into the hand
vacuum until you hear a click.
2. Insert one of the motorized nozzles into the
telescoping wand until you hear a click.
Click
3. Slide the battery pack along the slots
under the hand vacuum handle into
the vacuum.
4. Insert the 2 attachment clips into the wall
mountable charging dock on each side.
5. Insert the battery charger base into the
charging dock.

ASSEMBLY INSTRUCTIONS

Click
Click
Attachment Clip
6. Use the 2 screws provided to mount the
charging dock on the wall, but not to
drywall only. Secure the screws to a stud.
Mount at a recommended height of 59"
and no less than 44" above the floor.
Ensure that no plumbing or electrical
cables, wires or ductwork are located
directly behind the mounting area.
7. Attach all the accessories to the
charging dock for convenient storage
and accessibility.
8. Hang the hand vac handle on the wall
mount hook. Charge the unit for 3.5 hours
before using the vacuum for the first time.
CAUTION:
When attaching the
additional nozzle to
the charging dock,
align the nozzle slot
indentations with
the top edge of the
dock retention clip.
Push the nozzle
straight into the
clip. If the nozzle
is attached at an
angle, it may fall
off.
- 10 -