Using The Projector; Starting Up The Projector; First Time Activation; Preferred Language - ViewSonic M2 User Manual

Using the Projector

Starting Up the Projector

1. Ensure the projector's power cord is properly connected to a power outlet.
2. Press the Power button to turn on the projector.
NOTE: The Status LED will be blue during startup.

First Time Activation

If the projector is activated for the first time, you will need to select your Preferred
Language, Projection Orientation, Network Settings, and Source Input. Follow
the on-screen instructions using the OK and Up/Down/Left/Right buttons on the
remote control. When the Finish screen appears, this indicates the projector is
ready to use.

Preferred Language

Select the desired language and press OK to confirm the selection.
33