Coffee Strength; Making Coffee; Using The Timer - Russell Hobbs 23241-56 Instructions Manual

4. Make sure that the filter holder is pressed down all the way into position. It will click when
correctly installed.
5. Put a #4 paper filter into the filter holder.
6. The reservoir is calibrated to give 12 large cups (at 125ml per cup) and 18 small cups (at 83ml
per cup). For each large cup, add 6g of ground filter coffee and for each small cup add 4g.
7. Close the lid.
8. Replace the carafe on the hotplate.
SET THE CLOCK
It isn't neccessary to set the clock to use your coffee maker but you will need to set it if you want
to use the timer functions.
1. Put the plug into the power socket.
Use the h and min buttons to set the correct time in 24 hour format.
2.
• The clock will retain its settings until the coffee maker is unplugged.

COFFEE STRENGTH

Pressing the 1-4 button will make the brewed coffee slightly stronger. You can also use it if you
are only brewing a partial carafe of coffee (i.e. not completely filling the reservoir). Your coffee
maker will then alter the brewing process so your coffee will have about the same strength as it
would if you had made a full carafe.

MAKING COFFEE

Note: If you want to use the coffee strength feature press the 1-4 button before pressing the ]
button. The 1-4 button will light up.
1. Press the ] button – the 1 icon will appear on the display. The ] button will light up.
2. Shortly afterwards, coffee will start to drip into the carafe.
3. If you want to stop the coffee maker while it's brewing, press the ] button.
4. Once brewed, the hotplate will keep the carafe warm for up to 40 minutes.

USING THE TIMER

Note: Make sure the clock is set to the correct time. Use the h and min buttons.
1. Set the timer to the time you want to start brewing.
a) Press the T button .
b) Use the h and min buttons to set the time you want brewing to start.
If you don't press either the h or min buttons within 5 seconds, the coffee maker will revert
to "normal", and the current time will show. Press the T button to start again.
When the time is programmed, press the ] button. The T button will light up and the T
2.
icon will appear on the display. Your coffee maker is now set to make coffee at the selected
time.
If you want to use the coffee strength feature when using the timer, press the 1-4 button
3.
now. The 1-4 button will light up.
• If you want to cancel the timer before brewing has started, press the ] button.
• If you want to stop the coffee maker while it's brewing, press the ] button.
4