Table of Contents
Advertisement
Appendix B - Using the Air Plus Xtreme G
(continued)
• SSID: The Service Set Identifier is the name assigned to the wireless network. The
factory SSID setting is set to default. Make changes here to match the SSID on
existing Wireless Router or Access Point.
• Wireless Mode: The factory setting is set to Infrastructure. Ad-Hoc mode is used
for peer-to-peer networking.
• Data Encryption: The default setting is set to Disabled. The adapter supports WEP
and WPA when encryption is enabled.
• Authentication: Allows you to specify the authentication mode for the network. The
default setting is set to Open Authentication.
• Key Length: When encryption is enabled, you will have the option to specify the level
and key format of the encryption used. Select the appropriate Key Index: 1-4 and
enter ASCII or hexadecimal digits in the appropriate field.
• IEEE 802.1x: When encryption is enabled, you will have the option to specify if you
wish to use 802.1x authentication.
9
™
Utility
Advertisement
Table of Contents
