D-Link DWL-AG700AP Install Manual page 3

Connecting to your network Connecting to your network DWL-AG700AP Install Guide
Connect the power adapter to the receptor on the rear panel
A.
of the DWL-AG700AP and then plug the other end of the
power adapter to a wall outlet or power strip. The power LED
will turn ON to indicate proper operation.
Using an Ethernet cable, insert one end of the cable to the
B.
LAN port on the rear panel of the DWL-AG700AP and the other
end of the cable to a switch. Note: You also have the option of
connecting the DWL-AG700AP directly to the computer that will
be used for configuration. The link LED will illuminate to indicate
a proper Ethernet connection.
Computers with 802.11a/g wireless adapters can connect to
C.
the DWL-AG700AP.
Reset Button Reset Button
3
C. Antenna
Used to wirelessly connect to
802.11a/g networks.
B. LAN Port B. LAN Port
This is the connection for Ethernet cables to This is the connection for Ethernet cables to
attach to your Ethernet-enabled device. attach to your Ethernet-enabled device.
A. Receptor A. Receptor
Receptor for Power Adapter. Receptor for Power Adapter.
Connecting to your network
DWL-AG700AP Install Guide DWL-AG700AP Install Guide
D-Link Systems, Inc.