Using The Configuration Utility - D-Link DWL-G120 Quick Installation Manual

Using the Configuration Utility

A.
MAC Address of the
Access Point that is
associated with the
DWL-G120.
A
B
C
D
E
F
C. TxRate: The default
setting is Auto; however,
TxRate settings are
automatically determined
by the DWL-G120
depending on the
distance from the access
point.
Appendix
Status: Displays the
D. Channel:
channel information. By
default, the channel is set
to 6 and selection is
automatically determined
by the Access Point.
:
B. SSID The Service Set
Identifier is the name
assigned to the wireless
network. The factory SSID
setting is set to default
Displays the
9
E.
Link Quality /Signal
Strength: Displays the
wireless signal strength
for the DWL-G120
wireless connection to
the Access Point.