Zte A933G User Manual page 8

Table of Contents

Advertisement

• Use the battery only for its intended purpose.
• If you use the phone near a network base station, the phone uses less power.
Talk and standby times are greatly affected by the signal strength on the cellular
network and the parameters set by the network operator.
• Battery charging time depends on the remaining battery charge, the type of
battery, and the charger used. The battery can be charged hundreds of times,
but it will gradually wear out. When the operation time is noticeably shorter than
normal, it is time to buy a new battery.
• If left unused, a fully charged battery will discharge itself over time.
• Use only ZTE-approved batteries, and recharge your battery only with ZTE-
approved chargers. Disconnect the charger from the power source when it is not
in use.
• Extreme temperatures will affect the charging capacity of your battery: it may
require cooling or warming first.
• Do not leave the battery in hot or cold places because the capacity and lifetime
of the battery will be reduced. Try to keep the battery at room temperature. A
phone with a hot or cold battery may not work temporarily, even when the
battery is fully charged. Li-ion batteries are particularly affected by
temperatures below 0
• Do not short circuit the battery. Accidental short circuiting can occur when a
metallic object like a coin, clip or pen causes a direct connection between the +
and - terminals of the battery (metal strips on the battery). For example, do not
carry a spare battery in a pocket or bag where the battery may contact metal
objects. Short circuiting the terminals may damage the battery or the object
causing the short circuiting.
8
o
o
C (32
F).

Advertisement

Table of Contents
loading

Table of Contents