D-Link DWL-8220AP Install Manual page 7

Wireless switch access point
Hide thumbs Also See for DWL-8220AP:
Table of Contents

Advertisement

DWL-8220AP Install Guide
Installing the Hardware
Suspended Ceiling Installation (continued)
5. Attach the access point to the mounting bracket.
Warning: If you plan to use an external antenna for the
802.11b/g or 802.11a radio, install the antenna at least 20 cm
from the access point.
Suspended Ceiling Installation
Drop Ceiling Tiles
This procedure applies to T-bars that are 23.9 mm (15/16 inches),
14.2-mm (9/16-inches), or 15.9-mm (5/8-inches) wide. You also
can use this procedure for flush ceilings with 14.2-mm (9/16-inch)
or 15.9-mm (5/8-inch) T-bars.
1. Use the mounting template to cut a hole for the CAT 5 cable.
D-Link Systems, Inc.
7

Advertisement

Table of Contents
loading

Table of Contents