Table of Contents
Advertisement
Returning a Call (Outgoing History/
Incoming History)
Example: Returning a call to a phone number in the
incoming history
When the standby screen is displayed, press l.
•
Press r while the standby screen is displayed to display
the Outgoing History screen.
➡
Use j to select the phone number you want
to call and then press c (Detail).
•
Press r to display the Outgoing History screen.
➡
Press N .
•
The cell phone can store up to 50 phone numbers in
each of the incoming and outgoing history.
One-ring Calls
■
What is a One-ring Call?
A one-ring call is a call from an unknown caller that only
rings once, causing it to be stored in the incoming history.
One-ring calls are often used to get you to return the call,
which will connect you to a dating service or some other
service that charges you at high rates.
■
One-ring Indicator
One-ring indicator on the Incoming History screen indicates
you have received a one-ring call (a call rang for three
seconds or shorter). Be careful when you return a call to an
unknown caller.
Adjusting the Earpiece Volume
during a Call
During a call, use j.
•
u: Increases the volume.
•
d: Decreases the volume.
➡
Press c (OK).
Turning On Manner Mode
When the standby screen is displayed, hold down
( for at least one second.
This turns on manner mode, and displays
the standby screen. This also turns on Answer memo,
which is indicated by
■
Turning Off Manner Mode
When the standby screen is displayed, hold down ( for
at least one second.
Turning off manner mode causes
from the standby screen. Answer memo is also turned off,
which is indicated by
screen.
,
and
on the standby screen.
,
and
to disappear
disappearing from the standby
on
6
Advertisement
Table of Contents
