D-Link DWL-810 User Manual page 37

Ethernet wireless client adapter
Hide thumbs Also See for DWL-810:
Table of Contents

Advertisement

Networking Basics
Assigning a Static IP Address
• Select Use the following IP address
in the Internet Protocol (TCP/IP) Properties window,
• Input your IP address and subnet mask. (The IP Addresses on your
network must be within the same range. For example, if one computer
has an IP Address of 192.168.0.2, the other computers should have IP
Addresses that are between 192.168.0.3 and 192.168.0.254. No two
computers can have the same IP Address. The subnet mask must be the
same for all the computers on the network.)
• Input your DNS server address only if you plan to use the Internet.
(Note: If you are entering a DNS server address, you must also enter the IP
Address of the Default Gateway.)
The DNS server information will be provided by your ISP (Internet Service
Provider.)
Fig. 9.25
• Click OK
You have completed the assignment of a Static IP Address. (You do not need to
assign a Static IP Address if you have a DHCP-capable Gateway/Router.)
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Air dwl-810

Table of Contents