D-Link AirPlus DWL-810+ Quick Installation Manual page 2

Connecting the DWL-810+ to your
Ethernet-enabled device
A. First, connect the power adapter to the receptor at the back panel of the
DWL-810+ and then plug the other end of the power adapter to a wall outlet or
power strip. The Power LED will turn ON to indicate proper operation.
B. Insert one end of an Ethernet cable (included) to the Ethernet port on the back
panel of the DWL-810+ and connect the other end to the Ethernet port located
on the device (e.g., a Set Top Box, Gaming Console, laptop or desktop com-
puter, or network printer.) The LED light will blink when there is data tranfer
through the wireless connection. (Note: The Ethernet port on the DWL-810+
is Auto-MDI/MDIX. Meaning you can use a straight-through or crossover-
cable to the Ethernet Port.)
C. The antenna is used by the DWL-810+ to connect to other 802.11b wireless
devices.
A. Receptor for
Power Adapter
C.
Used to wirelessly
connect to 802.11b
networks.
This is the connection for
Ethernet cables to your
Ethernet-enabled device.
2
Antenna
B. LAN Port