Safety Notes; Important Safety Instructions; Regular Maintenance And Troubleshooting; Handling Precautions - DSC HS2TCHP v1.0 User Manual

Safety Notes

Safety Notes
This manual shall be used in conjunction with the applicable Neo 1.1 User Manual, for the compatible alarm
control panel models: HS2016, HS2032, HS2064, HS2128. Refer to part #: 29008610R001 (International) or
to part #: 29009034R001 (North American).
Always ensure you obtain the latest version of the User Guide. Updated versions of this User Guide are
available by contacting your distributor.
Warning: Read and save these instructions! Follow all warnings and instructions specified within this doc-
ument and/or on the equipment.

Important Safety Instructions

To reduce the risk of fire, electric shock and/or injury, observe the following:
Do not spill any type of liquid on the equipment.
l
Do not attempt to service this product yourself. Opening or removing the cover may expose you
l
to dangerous voltage or other risk. Refer servicing to qualified service personnel. Never open the
device yourself.
Do not touch the equipment and its connected cables during an electrical storm; there may be a
l
risk of electric shock.
Do not use the Alarm System to report a gas leak if the system is near a leak.
l

Regular Maintenance and Troubleshooting

Keep your HS2TCHP Touchscreen keypad in optimal condition by following all the instructions that are
included within this manual and/or marked on the product.

Handling Precautions

Do not apply excessive force to the display surface or the adjoining areas since this may cause the color
tone to vary.

Cleaning

If the display surface is contaminated, breathe on the surface and gently wipe it with a soft, dry
l
cloth. If still not completely clean, moisten cloth with isopropyl alcohol.
Do not use abrasives, water, thinners, solvents or aerosol cleaners (spray polish), any aromatic
l
solvents, ketones etc. that may enter through holes in the HS2TCHP Touchscreen keypad and
cause damage.

Troubleshooting

Occasionally, you may have a problem with your system. If this happens, your Alarm Controller will dis-
play an error message. Refer to the provided list when you see an error message on the display. If additional
help is required, contact your distributor for service.
Warning: This equipment, HS2TCHP Touchscreen keypad shall be installed and used within an envir-
onment that provides the pollution degree max 2 and over-voltages category II non-hazardous locations,
indoor only. It is designed to be installed, serviced and/or repaired by service persons only [service person
is defined as a person having the appropriate technical training and experience necessary to be aware of haz-
ards to which that person may be exposed in performing a task and of measures to minimize the risks to that
person or other persons]. There are no parts replaceable by the end-user within this equipment.
Warning: Never obstruct the access to the Alarm controller to which this equipment is connected. These
safety instructions should not prevent you from contacting the distributor and/or the manufacturer to obtain
any further clarification and/or answers to your concerns.
- 4 -