Download Print this page

Vista Simplicity Roller Shades Quick Start Manual

Rechargeable motorization

Simplicity

Rechargeable Motorization

ist a

ROLLER SHADES |

Quick Start Guide

Your shade has come pre-programmed from the factory. Follow these easy steps to get started.

2. Mount the shade.

3. Your shade is now ready!

Select the programmed channel and use the

UP and DOWN arrows to operate the shade.

Make sure there is only one shade programmed to the channel when setting a Favorite position.

If more than one shade is set, please see UNLINK A SHADE in the Simplicity guide at vistaproducts.com/guides.

2. To save the Favorite position, hold the

3. Press the STOP/FAVORITE button to

1. Using the UP and DOWN arrows,

move the shade to the desired

LIMIT button and hold the UP button at the

move the shade to the set Favorite position.

Favorite position.

same time. Release after the shade jogs once.

Make sure shade is fully stopped

NOTE:

before using the Favorite position.

For more in depth motorization programming instructions, please visit vistaproducts.com/guides

Table of Contents

Need help?

Do you have a question about the Simplicity Roller Shades and is the answer not in the manual?

Page 1 Simplicity Rechargeable Motorization ist a ROLLER SHADES | Quick Start Guide Your shade has come pre-programmed from the factory. Follow these easy steps to get started. 2. Mount the shade. 3. Your shade is now ready! Select the programmed channel and use the UP and DOWN arrows to operate the shade.
Page 2 Simplicity Rechargeable Motorization ist a Quick Start Guide 6 CHANNEL TIMER REMOTE Your shade has come pre-programmed from the factory. Follow these easy steps to get started. 1. Mount the shade. 2. Your shade is now ready! Press the CLOCK button until the display shows ‘Manual’.