Advertisement
Quick Links
PowerWand
™
V
ist a
Quick Start Guide
1. Mount the shade.
2. Your shade is now ready!
For operation, press the UP or DOWN button on the wand to move the shade in short steps.
Hold the UP or DOWN button for two seconds, then release. The shade will travel to its programmed upper or lower limit.
Using the center STOP button will allow you to stop the shade at any point during its' travel.
Setting/Using a Favorite Position
1. Using the UP and DOWN arrows, move
2. To save the Favorite position,
3. Press the STOP/FAVORITE button to
the shade to the desired Favorite position.
hold the SETTING button and
move the shade to the set Favorite position.
hold the UP button at the same time.
Make sure shade is fully stopped
NOTE:
Release after a series of short beeps.
before using the Favorite position.
For more in depth motorization programming instructions, please visit vistaproducts.com/guides
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Vista PowerWand
Summary of Contents for Vista PowerWand
- Page 1 PowerWand ™ ist a Quick Start Guide 1. Mount the shade. 2. Your shade is now ready! For operation, press the UP or DOWN button on the wand to move the shade in short steps. Hold the UP or DOWN button for two seconds, then release. The shade will travel to its programmed upper or lower limit.
- Page 2 Adjusting Upper and Lower Limits The upper and lower limits have been set at the factory. NOTE: Clearing the factory limits requires both the upper and lower limits to be reset. ADJUSTING LOWER LIMIT 1. Hold the SETTING button 2. After the shade stops beeping, 3.
Need help?
Do you have a question about the PowerWand and is the answer not in the manual?
Questions and answers