Advertisement
Batteries and case may become warm
during charging. This is normal.
Under ideal conditions, the handset
batteries should give about 13 hours
talktime or 170 hours standby time
on a single charge. However, new
NiMH batteries do not reach their full
capacity until they have been in
normal use for several days.
The charge capacity of rechargeable
batteries will reduce with time as they
wear out, so reducing the talk/standby
time of the handset. Eventually they
will need to be replaced. New batteries
are available from
or call
If you replace the handset batteries
with ones that have been fully charged,
the battery indicator will not show full
until the next charge cycle has been
completed. Charge the handset until
the batteries register full again. From
then on the display will be correct.
If you subscribe to a Caller Display
service the time and date will be set
with the first incoming call.
However, the year setting will have to
be changed manually. See opposite.
14
.
Press the
options button.
Press the
navigation
button until the display shows
.
Press the
options button.
appears.
Press the
options button.
Enter the day/month/year, e.g.
for 5th October 2003.
Press the
options button.
Enter the time – hours/minutes.
e.g.
for 9:25am.
Press the
options button.
Use the
buttons to select
hour mode.
Press the
options button.
Press the
navigation
button to
Press the
options button.
Use the
buttons to select 12 or 24 hour
display (12hr is the default).
Press the
options button.
Press the
until you reach the idle display.
navigation
if in 12
.
navigation
button
Advertisement
