Ferno ULTRALITE X User Instructions
Ferno ULTRALITE X User Instructions

Ferno ULTRALITE X User Instructions

Harness

Advertisement

Quick Links

Australia
HARNESS DESIGNATION:

GENERAL USE:

SUGGESTED APPLICATIONS:

COMPLIANCE

ATTACHMENT POINTS

Ensure you are familiar with all the attachment points on
this harness and their limitations. Each attachment point is
labelled appropriately.
Fall Arrest Attachment Points
1.
Rear dorsal webbing-ring is rated as a fall arrest
attachment point
2.
The front sternum webbing loops are rated as a Fall Arrest
attachment point when both attachment points are
joined together with an appropriate karabiner.
FRONT VIEW OF HARNESS AND FEATURES
Confined
space rescue
retrieval
attachment
point
Front fall arrest
attachment
loops
Front height
adjustment
buckles
HEAD OFFICE: 11 Johnstone Road, Brendale, QLD 4500
Toll Free: 1800 804 647 | Tel: +61 7 3881 4999 | Email: sales@ferno.com.au | www.ferno.com.au
FALL ARREST HARNESS
For use in situations where there is a risk of free fall
Industrial height safety, Elevated Work Platforms, Confined space, Rescue, High rope
activities, Ladder and Rope activities,Building maintenance, Roof work
Certified to AS/NZS 1891.1:2007 /
(refer notes on Energy Absorbers)
Confined
space rescue
retrieval
attachment
point
Quick connect
sternum strap
Height
adjustment
buckles
Quick connect
leg loop
buckles
Ultralite X Instructions: ID# 00198-V1- 03/2013
ULTRALITE X HARNESS
(VHI ULTRALITE X))
USER INSTRUCTIONS

WARNING

1.
A lanyard assembly should be secured to an anchorage
point that is at a level which will result in the minimum
free fall and the least total fall distance consistent with
the wearer's ability to carry out work tasks. The maximum
allowable free fall is no more than 2 m.
2.
Energy absorbers that absorb energy by permanent
deformation or destructive action should be discarded if
that process has commenced.
REAR VIEW OF HARNESS AND FEATURES
Rear soft
fall arrest
attachment
point
Reflective
material
Reflective
material
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ULTRALITE X and is the answer not in the manual?

Questions and answers

Summary of Contents for Ferno ULTRALITE X

  • Page 1 Height adjustment Front height buckles adjustment Reflective buckles material Quick connect leg loop buckles HEAD OFFICE: 11 Johnstone Road, Brendale, QLD 4500 Toll Free: 1800 804 647 | Tel: +61 7 3881 4999 | Email: sales@ferno.com.au | www.ferno.com.au...
  • Page 2 FITTING INSTRUCTIONS EMPLOYER: It is your responsibility to ensure all users are instructed and trained in the correct use and maintenance of the equipment. Once equipment is issued, it is assumed this has been completed. USER: Only competent users should use this equipment. It is your responsibility to read and understand these instructions and be properly trained in the use of this equipment.
  • Page 3 AS/NZS 1891.4 - Selection use solvents, etc and maintenance. Deterioration due to ultraviolet light or mildew HEAD OFFICE: 11 Johnstone Road, Brendale, QLD 4500 Toll Free: 1800 804 647 | Tel: +61 7 3881 4999 | Email: sales@ferno.com.au | www.ferno.com.au...
  • Page 4 ULTRALITE X SERIAL # PURCHASE DATE BATCH # COMMISSIONED DATE INSPECTION AND MAINTENANCE RECORD DATE NAME DETAILS HEAD OFFICE: 11 Johnstone Road, Brendale, QLD 4500 Toll Free: 1800 804 647 | Tel: +61 7 3881 4999 | Email: sales@ferno.com.au | www.ferno.com.au...

Table of Contents