DVG-2001S Install Guide
Power LED
Solid indicates a connection to
a good power source. Blinking
indicates startup or a reboot.
Power Receptor
Receptor for the supplied
power adapter.
Reset Button
With the power off, hold the
reset button using a paper clip
and power on the unit. Hold for 5
seconds and release.
D-Link Systems, Inc.
Front Panel
LAN LED
Solid indicates an Ethernet connection. Blinking
indicates traffic at the Ethernet port.
Rear Panel
Phone Port
Connect to your phone using
a standard phone cable.
LAN Port
Connects to your Ethernet network. The LAN
port supports Auto MDI/MDI-X, allowing you to
connect a straight-through or crossover cable.
Hardware Overview
Phone LED
A solid light indicates that the phone
is off the hook (in use). A blinking
LED indicates an incoming call.
3