Troubleshooting - Insignia NS-AF32DBK9 User Manual

Troubleshooting

PROBLEM
The air fryer does not work.
The food fried in the air
fryer isn't done.
The ingredients are fried
unevenly in the air fryer.
Fried snacks are not crispy
when they come out of the
air fryer.
I cannot slide the pan into
the fryer properly.
White smoke comes out of
the air fryer.
12
NS-AF32DBK9/NS-AF55DBK9/NS-AF55DBK9-C
POSSIBLE CAUSE
The fryer is not plugged in.
You have not set the
temperature or timer.
The pan is not put into the
fryer properly.
There's too much food in
the air fryer.
The set temperature is too
low.
The preparation time is too
short.
Certain types of ingredients
need to be shaken halfway
through the preparation
time.
You used a type of snacks
meant to be prepared in a
traditional deep fryer.
There is too much food in
the basket.
The basket is not placed in
the pan correctly.
You are preparing greasy
ingredients.
The pan still has grease
residue from a previous use.
www.insigniaproducts.com
SOLUTION
Plug the power cord into a
grounded wall outlet.
Press (power) to turn on
the fryer, adjust settings,
then press (power)
again to start.
The air fryer won't turn on
unless the pan is fully
inserted. Slide the pan into
the fryer properly.
Put smaller batches of
ingredients in the basket.
Smaller batches are fried
more evenly.
Increase the air fryer's
temperature.
Cook your food longer.
Shake foods that lie on top
of or across each other (e.g.
fries) halfway through the
preparation time.
Use oven snacks or lightly
brush some oil onto the
snacks for a crispier result.
Do not fill the basket
beyond the MAX indication.
Push the basket down into
the pan until you hear a
click.
When you fry greasy
ingredients in the air fryer, a
large amount of oil will leak
into the pan. The oil
produces white smoke and
the pan may heat up more
than usual. This does not
affect the fryer or the end
result.
White smoke is caused by
grease heating up in the
pan. Make sure that you
clean the pan properly after
each use.