Waterstone 3600-12 Installation Instructions Manual page 4

CLEANING AERATOR AND DEBRIS SCREEN
1.
A
Depending on quality of your household water, the aerator and
debris screen may become clogged. We recommend cleaning
one week after installation, then a minimum of once of year
thereafter. To remove the debris, follow the steps below.
2.
B
C
3.
1. Gently unscrew and remove spout tip (A) by hand.
2. Remove O-ring (B). To remove aerator (C), push with finger from bottom.
3. Thoroughly rinse aerator with water until all debris is removed.
4. Place aerator, then O-ring back into spout tip.
5. Gently screw spout tip, by hand, snuggly back onto spout.
4. 5.