Changing The Display - Sony MHC-GPX8 Operating Instructions Manual

6
Press / repeatedly to select
the sound source you want, then
press ENTER.
For Recording Timer:
Connect a transferable USB device to
the B port on the unit.
7
Press "/1 to turn off the system.
To check the timer setting or
activate the timer again
1
Press TIMER MENU.
"TIMER SELECT" flashes in the
display panel.
2
Press ENTER.
3
Press / repeatedly to select
"PLAY SELECT" or "REC
SELECT", then press ENTER.
To cancel the timer
1
Press TIMER MENU.
"TIMER SELECT" flashes in the
display panel.
2
Press ENTER.
3
Press / repeatedly to select
"TIMER OFF", then press ENTER.
Notes
• The system turns on before the preset time. If
the system is turned on at the preset time or if
"STANDBY" flashes in the display panel, the
Play Timer and the Recording Timer will not
play or transfer.
• Do not operate the system from the time the
system turns on until the playback or
transferring starts.
24 GB

Changing the display

Changing the display mode
Press DISPLAY on the remote
control repeatedly while the
system is turned off.
Demonstration
The display changes and the indicator
flashes even when the system is turned
off.
No display (Power Saving Mode)
The display is turned off to conserve
power. The timer and clock continue to
operate.
Clock
The clock display automatically turns to
Power Saving Mode after a few seconds.
Changing the spectrum
pattern of the display panel
1
Press OPTIONS.
2
Press / repeatedly to select
"SPECTRUM", then press
ENTER.
3
Press / repeatedly to select
the spectrum pattern you want,
then press ENTER.
To exit the OPTIONS menu, press
OPTIONS.