DSC WLS919 Operating Instructions

WLS919
Wireless Key
OPERATING INSTRUCTIONS
The WLS919 wireless key allows you to arm and disarm your alarm system,
as well as perform other keypad functions, from a unit small enough to
keep in your pocket. Together with your installer, you can decide which
functions you wish to have accessible from your portable key.
To activate any one of the four selected functions, press and hold the
appropriate button for two seconds. The functions will be etched on each
button. These can be changed by the installer by placing labels on the
button that needs to be changed.
False Alarm Prevention
The WLS919 has a slide cover, used to cover 2 or all of the buttons, to prevent accidental activation. The
WLS919 is shipped with a red panic button (
ensure the correct key is pressed in a panic situation.
Signals will not be received if the key is not within the range of the wireless receiver.
The default functions are as follows:
Stay Arming
Press this button to arm your system in the Stay mode. All perimeter zones will be armed, such as all
window and door contacts, but the interior zones will remain inactive, allowing you to stay on the premises
without setting off an alarm.
Away Arming
Press this button to arm your system in the Away mode. Both the interior and exterior zones will be armed,
allowing you to exit the premises.
Disarm
Press this button to disarm your system. You do not have to enter your access code when you use the key
to disarm the system.
Panic
Press this button to notify your central monitoring station of a situation requiring the police, such as a break-in.
Other available functions (to be programmed by the installer):
Fire
Press this button to notify your central monitoring station of a fire condition.
Auxiliary
Press this button to notify your monitoring station of a non-medical emergency.
Quick Exit
Press this button to allow 2 minutes to exit the premises while the system is armed, without sounding the alarm.
System Test
Press this button to activate a system test. The alarm will sound for 2 seconds and a communication will be
sent to the central monitoring station, if programmed to do so.
Please discuss all WLS919 options with your installer in order to program the best possible
combination to suit your needs.
Available Model: WLS919-433
). The color difference will make this button easy to identify to