DSC WLS909NB Operating Instructions

DSC WLS909NB Operating Instructions

Wireless key

Advertisement

WLS909NB
Wireless Key
OPERATING INSTRUCTIONS
The WLS909NB wireless key allows you to
arm and disarm your alarm system, as well
as perform other keypad functions, from a
unit small enough to keep in your pocket.
Together with your installer, you can decide
which functions you wish to have accessible
from your portable key.
To activate any one of the four selected
functions, press and hold the appropriate
button for two seconds. Your installer will
indicate each function by applying a circular
label beside each of the four buttons.
Signals will not be received if the
key is not within the range of the
wireless receiver.
Some of the most commonly used functions are as follows:
Stay Arming
Press this button to arm your system in the Stay mode. All perimeter zones
will be armed, such as all window and door contacts, but the interior zones
will remain inactive, allowing you to stay on the premises without setting off
an alarm.
Away Arming*
Press this button to arm your system in the Away mode. Both the interior
and exterior zones will be armed, allowing you to exit the premises.
Disarm*
Press this button to disarm your system. You do not have to enter your
access code when you use the key to disarm the system.
Fire
Press this button to notify your central monitoring station of a fire condition.
Auxiliary
Press this button to notify your central monitoring station of a non-medical
emergency. Please discuss the functionality of this button with your installer.
Panic
Press this button to notify your central monitoring station of a situation
requiring the police, such as a break-in.
Other options are available. Please discuss all WLS909NB options with your
installer in order to program the best possible combination to suit your needs.
*NOTE: In the UK some restrictions may apply. Please contact your
installer for details.
key
ring
WLS909NB
four
option
buttons

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WLS909NB and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for DSC WLS909NB

  • Page 1 Press this button to notify your central monitoring station of a situation requiring the police, such as a break-in. Other options are available. Please discuss all WLS909NB options with your installer in order to program the best possible combination to suit your needs.
  • Page 2 Insert the new batteries according to the diagram at right and reattach the two sides of the key’s plastic casing. The WLS909NB requires three batteries of type LR44. NOTE: The polarity of the batteries must be observed.

Table of Contents