System Bluetooth Info; Vehicle Name; Passkey; Default - Hyundai VELOSTER Owner's Manual

Settings

System Bluetooth info

Vehicle name

You can change the Bluetooth device name of
the vehicle.
1. Press [SETUP] > [Bluetooth] > [System
Bluetooth info] > [Vehicle name].
2. Enter the desired name using the keypad,
then press [OK].
Note
The default vehicle name is set to HYUNDAI
MOTORS.
PIO JS CIS PIO JS CIS ENG MFLXXXXXXXX.indd 54 ENG MFLXXXXXXXX.indd 54

Passkey

You can change the passkey used for Bluetooth
device authentication.
1. Press [SETUP] > [Bluetooth] > [System
Bluetooth info] > [Passkey].
2. Enter the passkey using the keypad.
Note
The passkey is a 4-digit authentication code used
for a Bluetooth connection between the mobile
phone and car system. The default passkey is set
to 0000.

Default

This menu is used to reset the Bluetooth settings
to factory default.
Press [SETUP] > [Bluetooth] > [Default] > [Yes].
54

Phone projection

This menu describes phone projection settings.
1. Press [SETUP] > [Phone projection].
2. Press the desired items.
[Android Auto]: If Android Auto is checked,
you can use the functions of your Android
device with a USB cable connected.
[Apple CarPlay]: If Apple CarPlay is
checked, you can use the functions of your
iPhone with a USB cable connected.
2017-11-24 2017-11-24 3:42:06 3:42:06