Assembly Instructions - Kenmore 125.10340 Use & Care Manual

Before assembling the vacuum, check the PACKING LIST (Page 2). Use this list to verify
that you have received all the components of your new Kenmore Cordless 2-in-1 Stick
Vacuum.
1. Fit the vacuum body into the motorized
brush powerhead and lock into place.
2. Insert the handle into the top of the main
body, as illustrated, and lock into place.
Click!
3. Insert the hand
vacuum into the
main body as shown
and lock into place.
Ensure that the dust
cup is secure in
place.

ASSEMBLY INSTRUCTIONS

Click!
- 7 -
4. Insert vacuum support
into charger base and
lock into place.
5. The charging adapter plug will fit into
the charger base only one way. Insert the
charging adapter plug into the charging
port on the bottom of the charger base
and thread the cord out as illustrated.
6. Plug the adapter into a wall outlet.
Click!