D-Link DP-101P+ User Manual page 50

•
Highlight Internet Protocol (TCP/IP)
•
Click Properties
•
Select Use the following IP address
in the Internet Protocol (TCP/IP) Properties
window
•
Input your IP address and subnet mask. (The
IP Addresses on your network must be within
the same range. For example, if one computer has
an IP Address of 192.168.0.2, the other computers
should have IP Addresses that are sequential, like
192.168.0.3 and 192.168.0.4. The subnet mask
must be the same for all the computers on the
network.)
•
Input your DNS server addresses. (Note: If
you are entering a DNS server, you must enter
the IP Address of the Default Gateway.)
The DNS server information will be provided by
your ISP (Internet Service Provider)
Click OK
You have completed the assignment of a Static IP Address. (You do not need to assign a Static IP Address
if you have a DHCP-capable Gateway/Router.)
Other Tasks
For help with other tasks in home or small office networking, see Using the Shared Documents folder and
Sharing files and folders in the Help and Support Center in Microsoft Windows XP.
Networking Basics
50