D-Link DP-101P+ User Manual page 33

Configuration Configuration Configuration
Configuration Configuration
Click on "Configuration" in the systems tool bar to show the Configuration Table. It provides settings to
configure the print server to print using TCP/IP Protocol, NetBEUI Protocol and AppleTalk Protocol.
Configuration > Server Device
Click on "Server Device" in the Configuration Table. The page will appear as below providing the settings
required to configure the print server. Click the "Save" button to ensure the settings are updated and saved.
Server Name: The name assigned to the print server.
Location: (optional) Input a comment where the print server is located.
Admin Contact: (Optional) Administrator name for the print server.
Password: By default the DP-101P+ does not have a password. This is a security risk. it is recommened
that you enter in a password for the print server.
Port Name: This is the assigned name for the LPT port.
Description: A brief description for the LPT port.
Speed: Printer port speed, High or Low.
PJL Printer: This feature is used to support Hewlett-Packard PJL (Printer Job Language) standard for
bi-directional printing.
33